ECH-K
Dry material design
The micro cut with separately driven feeding screw.For cutting of vegetables, fruits, broken cookies and chocolate, nuts and almonds.
Cutting principle
The MicroSlicer operates by the contactless rotor-stator-system. The cutting head is rotating with a motor speed of 3000 rpm inside of the cutting ring, which defines the standard clearance between 3 (maximum 11) and 0.2 mm. By a double cutting tool of different clearances, multiple cutting operations can be carried out in one step. The particle size is controllable by speed control of cutting tool and feeding screw, as an option.
Youtube "Cutting of cookies and chocolate for sweets production and rework."
Advantages
- non-contact operation
- no abrasion
- low increase of temperature
- ideal cutting
- excellent cutaway view
- unvarying quality
- high durability
- cost effective
- user friendly
Technical specifications
|
Component |
ECH125-7,5K |
ECH150-30K |
|
Drive |
7.5 kW; 3,000 rpm |
30 kW; 3,000 rpm |
|
Cutting tool |
125 mm |
150 mm |
|
Cutting measure |
Selectable, standard 0.2 up to 11 mm possible |
Selectable, standard 0.2 up to 11 mm possible |
|
Electrical equipment |
400 Volt/50 Hz |
400 Volt/50 Hz |
|
Hopper |
40 litres |
40 litres |
|
Feeding screw |
separately driven, with huge screw flights |
separately driven, with huge screw flights |
|
Machine frame |
stationary, mobile version possible |
stationary, mobile version possible |
|
Materials |
Stainless steel V2A, in contact with product V4A |
Stainless steel V2A, in contact with product V4A |
|
Output |
600 - 800 kg/h |
1,500 - 2,500 kg/h |
|
Outfeed |
rectangular, downwards |
rectangular, downwards |
Options
|
Component |
Description |
|
Speed control |
on screw drive and/or cutting tool drive |
|
Taper tap |
Cutter knife for pre-cutting |
|
Hopper extension |
Heightened hopper for feeding with lifting and tilting device |
|
Wedge cutting tools |
for oil-bearing products |